In detail
Materials
Superfine Merino fabric we use is 100% Australian grown, spun and woven. It is not sent offshore to be processed but is made in Victoria, Australia. This means that our Merino retains a low carbon footprint by reducing the transportation required from the farm to our supplier, to us; all of which add to the already high sustainable credentials of wool fibre.
Our Merino is also certified ‘non-Mulesing’, meaning it is sourced from ‘best farming practices’ growers that ensure the highest standards of animal welfare.
The 200gsm (5.9 oz) Superfine Merino is light and tough, yet soft against the skin with a non itch feel. As the 200gsm regulates temperature so well, we use it as a base layer in winter and an only layer in summer, and have tested it from 0 degrees C all the way through to 38 deg C and can vouch for its outstanding abilities.
Other key features of Merino are:
- Fully breathable.
- Natural thermally regulating – keeps you warm in winter AND cool in summer.
- Naturally anti bacterial and odour free.
- Excellent UV protection properties.
- Flame resistance.
- Sustainable, renewable and biodegradable.
- Ethically grown, locally.
- Made from Superfine Australian Merino
- Not blended with other, lesser quality wool or synthetic products.
- Machine washable.
- Excellent colour fastness.
Size | XS (34) | S (36) | M (38) | L (40) | XL (42) | XXL (44) |
---|---|---|---|---|---|---|
*Size CM | 6cm | 91cm | 97cm | 102 | 107 | 112 |
*Size IN | 34 | 36 | 38 | 40 | 42 | 44 |
A=FINISHED CHEST: | 42.5cm 16.5" |
46.5cm 17.5" |
50.5cm 19.5" |
52cm 20 1/2" |
54 21 1/4" |
58 23" |
B= FINISHED LENGTH: | 37cm 14.5" |
38cm 15" |
39.5 15.5" |
45cm 17 3/4" |
47cm 18 1/2" |
53 21" |
D+SLEEVE LENGTH: | 74cm 29 1/4" |
75cm 29 1/2" |
79cm 31" |
81cm 32" |
83cm 32 3/4" |
84cm 33" |
F=DROP: | 5cm 2" |
5cm 2" |
5cm 2" |
6cm 2 1/2" |
6cm 2 1/2" |
6cm 2 1/2" |
Keep in mind Merino does not have the stretch of many synthetics, so a firm fitting Merino top will feel… firm.
Benchmark measuring
‘Finished’ refers to the final dimensions of the garment and you can use these to measure against a similar garment you may have to see how they compare. Keep in mind that when using this method, there will be some discrepancies due to unavoidable variations in sewing etc., as well as any shrinkage in the garment you are using to measure from.
To measure a top, lay it flat and use the below chart as a guide on how to obtain comparative measurements. Try and make sure there are no wrinkles when measuring and ensure not to stretch the garment, which can make it longer than it really is. (Note: Measurements may vary +/-5mm | 1/4″):
A = FINISHED CHEST: Measured from arm pit to arm pit.
B = LENGTH: Measured at the side from arm pit to base of hem.
C = HEM: The finished hem of the top laid flat. Measured across the base.
D = SLEEVE LENGTH: Measured from collar edge to the cuff.
F = DROP: The amount the centre back hem is lower than the front.
Care
For best results and product longevity, we suggest the following care instructions:
- Cold to warm wash. Cold wash for best results.
- Hang or warm machine dry. Hang dry is preferable.
- Do not bleach.
- Warm iron.
Crash Replacement
Bought some Breathe VĂ©lo kit that you love but crashed hard and wrote it off beyond any level or wearability? We have you covered.
Our crash replacement program removes the insult from injury and offers you a 30% discount to replace what your crash took away. To qualify for the program, send us pics of your destroyed kit and we’ll assess if we can repair it or it needs to be replaced.